SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Industrial Jibs
Industrial Jibs - Lift truck jibs enable the person operating it to reach over obstacles with a purpose to put their heavy heaps on decks, roofs and even elevated platforms. They're usually utilized to reach through second or even third story doorways or even windows to be able to lift and move loads to areas still under construction. Fork truck jibs are really utilized to be able to unload trucks and flatbed trailers, to suspend trusses and laminate wood. Jibs are even often used for reaching over scaffolding intended for masonry work.
Each forklift jib attachment is outfitted with two revolving hooks. One of the hooks could be manually connected on the bottom of the boom at any position whereas the other hook remains fixed at the end of the jib. This enables the person operating it to be able to carry stuff that have two hook points. Dependent upon the size of the model, every hook is rated at either four thousand or six thousand pounds It is possible to utilize either a hook or even both to be able to lift a load. The operator should make certain that the total weight of the jib and the load will not exceed the rated capability of the jib as shown on the load chart for that retracted or extended position.
Attachments jibs could be utilized on industrial lift trucks, extendable-reach forklifts, or even on rough terrain straight-mast lift trucks. The forklift jib cranes can be installed onto the forklift by inserting both of the forks into the fork pockets. The back of the jib crane then seats against the rear of the fork and a security chain wraps the forklift carriage to hold it into place.
Load Capacity for the Jib Boom Forklift Attachment
The maximum load capacity for forklift jibs in both the extended or retracted positions vary from 1935 lbs to 6000 pounds. It is a good idea to ask a material handling specialist concerning the limits for your specific application. The load capacity rankings are really used for the jib itself and not the lift truck or the maximum load that can be carried safely using a certain lift truck. It is very important bear in mind that each time whatever accessories like for example a lift truck jib are attached to the forklift, the new center of gravity created by the attachment will lessen the general lift capability of the forklift. There are guidelines accessible which offer details on how to properly gauge these load limits.
Safe Usage of your Fork Lift Attachment & Fork Trucks
Previous to using a lift truck jib, ensure that it is properly secured to the forklift with hooks and shackles. Always double check to be able to verify that the screw pins are tight. It is vital to also double check that the weight calculations have been made correctly. Keep in mind to take into account the truth that rated capacities sometimes decrease when the boom is in an elevated position, whenever the boom is fully extended with telehandlers or even every time the mast is slanted forward.
A few important suggestions about the adjustable jib are: do not ever pull a load utilizing a lift truck jib accessory, since these attachments are actually meant for vertical lift only. Always lift the load without letting it move to and fro. Utilize extreme caution each time a load is carried to prevent tipping over the truck.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
LOCAL: 619-677-6197
330 A St Suite 158
San Diego, California
forkliftpartssandiego.com
Email Us
About Us