Cascade Clamps

Cascade Clamps - Founded in Portland, Oregon in the year 1943, the Cascade Manufacturing Company started as a small machine store employing only four individuals. Overall sales for that initial year totaled $60,000. The first recorded sales revenues involved the machining and assembly of stainless-steel pipe fittings, valves and other parts. Through 5 years of operation, the business had stretched to 40 employees and their yearly sales volume had risen to three hundred thirty thousand dollars. Today, Cascade is amongst the leading international makers within the material handling trade.

Design and production of the company's initial hydraulic cylinder allowed this new business to aggressively pursue new business possibilities. All through the last 60 years, the trade of material handling has developed into a really sophisticated area with Cascade proudly playing a part in its growth. Cascade at present continues to develop as the best provider of forklift attachments and numerous associated products. The business feels confident in their skill so as to continue to lead the way within the business by understanding customer's requirements in the future and remaining aggressive in the world market.

In the 1950's, Cascade began designing, making and selling hydraulic attachments. Manufacturing was completed in the year 1956 on a new office in order to house all the plant and office operations in Portland, Oregon at the company's current center of operations. Following fifteen years of business, total employees reached 180 employees and sales had reached nearly two million three hundred thousand dollars.

In the year 1959 in Springfield, San Diego a second production facility was built. The year 1960 marked Cascade's initial move into the international world of the material handling industry when the company established interest in Australia, the Netherlands and England.

The company changed its name to Cascade Corporation in 1964. In the year 1965, Cascade went public with a preliminary offering of two hundred thousand shares of common stock. The business has expanded its production plants throughout the U.S. with areas in Springfield, San Diego, Warner Robins, Georgia, Portland, Oregon. Cascade merchandise are fabricated internationally because of a lot of subsidiary operations. In 1994, a new plant was accomplished in Almere, the Netherlands which is Cascade's European command center. This plant is built to be the essential customer service centre.

Continuing to grow, Cascade expanded their product offering further in 1996 and the year 1997 with the remarkable acquisition of five firms, along with the global best in blades, the Kenhar Corporation.

Click to Download the pdf

Forklift Parts

Concrete Hopper

Concrete Hopper - This attachment is a self-dumping hopper that automatically starts to unload whenever bumper release touches the side of a dumpster. As soon as dumping is done, the hopper returns to an upright and locked position. This piece of equipment also comes together with a cable which enables operation from the seat of the forklift so as to...

More

---

Side Tilt Carriages

Side Tilt Carriages - Rated by the fork carriage lifting capacity, there are actually four sizings of hook type fork carriages. The hook type blade carriages have been standardized. The carriage bar spacing used for Class 1 is roughly 13 inches and the Class 1 carriage is rated to hold loads up to 2000lbs. The Class 2 carriage is rated...

More

---

Controllers for Forklift

Controller for Forklift - Forklifts are obtainable in several load capacities and several models. Most forklifts in a typical warehouse situation have load capacities between 1-5 tons. Bigger scale models are used for heavier loads, like for example loading shipping containers, may have up to 50 tons lift capacity. The operator can utilize a control so as to lower and...

More

---

Parts for Aerial Lift

Aerial Lift Parts - Aerial platform lifts can be used to accomplish numerous distinctive tasks done in hard to reach aerial places. A few of the duties associated with this type of lift include performing daily upkeep on buildings with lofty ceilings, repairing phone and utility cables, lifting heavy shelving units, and pruning tree branches. A ladder might also be...

More

---

Forklift Attachment

Forklift Attachment - Used to facilitate the transportation of heavy things, forklifts are used by a lot of organizations to move their manufactured goods and to storage their goods. Furthermore, there is a wider array of attachments accessible to help guarantee that tasks can be completed in a safer and more efficient manner. Farmers for example, usually need to move...

More

---

Meritor Part

Meritor Part - Meritor is a premier international dealer that is proudly built on a one hundred year custom of service and quality. They concentrate on various integrated systems, modules and parts to original machine makers and the aftermarket for the industrial and transportation trades. Meritor values the needs of all their customers to guarantee their success while priding itself...

More

---

Forklift Gears

Gear for Forklift - A gear pump is amongst the most common types of pumps designed for applications of hydraulic fluid power. A gear pump functions by utilizing the meshing of gears to be able to pump fluid by displacement. These devices are commonly used in chemical installations to be able to pump fluid with specific viscosity. Two basic kinds...

More

---

Truss Boom

Truss Booms - A truss boom is actually used in order to pick up and place trusses. It is actually an extended boom additional part that is outfitted with a pyramid or triangular shaped frame. Usually, truss booms are mounted on machinery like for example a skid steer loader, a compact telehandler or even a forklift making use of a...

More

---